car repairs

4 Common Engine Repairs You May Need

An internal combustion engine has thousands of moving parts and materials that enable it to run well. Those parts and materials need maintenance and occasional car repairs to keep them in good mechanical condition. According to Zippia, the nation’s auto parts manufacturing industry employs about 923,000 people. Many of them make the parts that are needed to fix your car’s engine. Here are some of the most common repairs that your car’s engine might need.

1. Replace Spark Plugs and Coils

An internal combustion engine won’t run if it doesn’t have any spark to cause the combustion. If your engine stalls or runs roughly, it might have one or more defective spark plugs or coils that won’t deliver the spark as they should. A technician can inspect the plugs and coils for fouling or damage and replace them. Many people have engine tune-ups done to prevent problems with the spark plugs and coils, so the engine runs like it should.

2. Install New Belts and Hoses

Engines have timing belts, serpentine belts, and alternator belts. They also have rubber hoses connecting the radiator to the motor and rubber-coated brake lines that enable the brakes to work. Belts and hoses can harden and develop cracks and other bad spots that weaken them. Checking your hoses and belts and replacing them before they break and require costlier car repairs is one of the most common types of engine work done on vehicles.

3. Repair Defective Water, Oil, and Fuel Pumps

Your car’s engine has a water pump that circulates the coolant, so the engine stays relatively cool. It also has an oil pump that circulates oil internally to lubricate parts and reduce friction. The engine also needs a fuel pump, which is mounted to the fuel tank and sends fuel to the engine. Those pumps can go bad over time and need to be replaced to prevent an engine failure.

4. Replace Gaskets, Seals, and Sensors

The many parts that make an engine work also have gaskets and seals to stop them from leaking oil, fluids, or compression. Gaskets and seals can dry out and become brittle over time, which might cause them to fail and need to be replaced. A head gasket is a good example and requires replacing to maintain compression and prevent oil leaks. Sensors also need to be replaced, such as oxygen sensors that sometimes go bad and affect engine performance.

If your engine hasn’t been running normally and you believe it may need a repair, don’t hesitate to reach out to our experienced team at Melton Automotive. We’re there for you when you need us!

Melton Automotive
Average rating:  
 0 reviews
0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *